Product Description

Xenon Arc Chamber is a comprehensive weather test equipment. In addition to weather aging test, it can also test the light resistance of high-quality materials, that is, polymer materials are exposed to artificial light sources that simulate the sunlight spectrum through glass to evaluate the light resistance of materials performance. Carry out simulation and intensified tests from the main climatic factors of light energy, temperature, rainfall or condensation, and humidity; use xenon arc lamps that can simulate the full sunlight spectrum to reproduce the destructive light waves existing in different environments; xenon lamp weather resistance tests The chamber can provide corresponding environmental simulation and accelerated tests for scientific research, product development and quality control.

Design Principle

Light source design: Xenon lamp is the core light source of Xenon Arc Chamber, which generates high-intensity light radiation through xenon gas through current, covering a wide band from ultraviolet to visible light, and even infrared. These radiations truly simulate natural sunlight.
Spectral design: The spectrum emitted by the xenon lamp is similar to that of the sun. In order to accurately simulate different environmental conditions, the test chamber is usually equipped with a filter device (such as an ultraviolet filter), which can adjust the spectrum of the light source and simulate different intensities of ultraviolet rays (UV-A, UV-B) and various visible lights.
Functional design: In addition to the xenon lamp spectrum, Xenon Arc Chamber can also perform temperature and humidity control to simulate real environmental conditions more realistically.

Meet Standard

The test standards that the xenon arc chamber can meet are as follows:

IEC 68-2-9, Basic Environmental Testing Procedures-Part 2:Guidance for Solar Radiation Testing

ISO 4892-1, Plastics-Methods of exposure to laboratory light sources-Part 1: General Guidance

ASTM G151, General Guidelines for Exposure of Nonmetallic Materials

ASTM G155, Xenon-Arc Test Apparatus for Exposure of Nonmetallic Materials

ISO 105-B02, Textiles - Color fastness test - Color fastness to light: Daylight

ISO 3865, Rubber, Vulcanized or Thermoplastic - Methods of test for staining on contact with organic materials

ISO 4665, Rubber, Vulcanized or Thermoplastic - Resistance to weathering

ISO 4892-2, Plastics-Methods of exposure to laboratory light sources-Part 2: Xenon-arc sources

JIS K 7350-2, Plastics-Methods of exposure to laboratory light sources-Part 2: Xenon-arc sources

DIN EN 513, Unplasticized polyvinylchloride (PVC-U)profiles for fabrication of windows & doors

ASTM D1248 , Polyethylene Plastic Extrusion Materials for Wire a nd Cable

ASTM D2565 , Xenon-Arc - Plastics for Outdoor Applications

ASTM D4101, Polypropylene Plastic Injection a nd ExtrusionMaterials

ASTM D4459 , Xenon-Arc - Plastics for Indoor Applications

ASTM D5071, Xenon-Arc Exposure of Photodegradable Plastics

ASTM D6662, Plastic Lumber Decking BoardsUL 1581, Reference Standard for Electrical Wires, Cables & Flexible Cords

SAE J2412, Accelerated Exposure of Automotive Interior TrimComponents Using a Controlled Irradiance Xenon-ArcApparatus

SAE J2527, Accelerated Exposure of Automotive ExteriorMaterials Using a Controlled Irradiance Xenon-Arc ApparatusQB/T 2727

ASTM D7356, Standard Test Method for Accelerated Acid EtchWeathering of Automotive Clearcoats Using a Xenon-ArcExposure Device

ISO 11341, Paints a nd varnishes - Artificial weathering a nd exposure to artificial radiation-Exposure to filtered xenon-arc radiation

ASTM D3451, Testing Coating Powders a nd Powder Coatings

ASTM D3794, Testing Coil Coatings

ASTM D6577, Standard Guide for Testing Industrial Protective Coatings

ASTM D6695, Xenon-Arc Exposures of Paints a nd Related Coatings

UL 2556 , ASTM G155, CSA C22.2

GB12831-86 vulcanized rubber artificial climate (xenon lamp) aging test method

GB/T1644.2-1999 Plastic Laboratory Light Source Exposure Test Method (Part 2: Arc Xenon Lamp)

GB/T8427-89 Textile color fastness test, color fastness to artificial light xenon arc

GB/T8430-98 Textile color fastness test, color fastness to artificial light xenon arc

GB/T1865-97 Paints, varnishes, artificial weathering and artificial radiation exposure (filtered xenon arc radiation)

GB/T16991-97 Textile Color Fastness Test Color Fastness to High Temperature Light: Xenon Lamp

GB/T5137.3-96 Test Method for Resistance to Radiation, High Temperature, Humidity, Combustion and Weather Simulation of Automobile Safety Glass

GB/T16259-96 Colored building materials, artificial climate acceleration, color aging test method.

GB/T2423.24-95 Environmental Test of Electronic and Electrical Products Part 2: Test Method, Test SQ: Simulate solar radiation on the ground.

Main Technical Parameter

Inner size W×H×D	500×600×500 mm
External size W×H×D	750×1670×1050mm
Temperature range	RT.～80℃
Temperature deviation	±2℃ (without lighting)
Humidity range	50%～98％R.H
Humidity deviation	±2.5%R.H(humidity≥75%R.H) ±3%R.H(humidity≤75%R.H) (without light)
Type of light source	Imported air-cooled full solar spectrum long arc xenon lamp (average service life is about 1500 hours)
Rain time	1～9999 minutes, adjustable
Rain cycle	1～240 minutes, interval (break) adjustable
Spectral wavelength	290nm～800nm
Xenon lamp power	1KW, 2.5KW (lifetime: 1500 hours)
Irradiance range	550W～1200W/㎡ adjustable
Heating power	about 4.6KW
Humidification power	about 3KW
Light source irradiance	Full spectrum 550W～1200W/㎡ (continuously adjustable); The energy compensation of the xenon lamp is realized by adjusting the voltage and current.
The stage rotation speed is adjustable	0-5 rpm (stepless speed regulation)
Distance from arc center to sample holder	350～380mm
Rotating speed of sample rotating basket	None
Water spray time	0～99h59min, continuously adjustable
Stop spraying time	0～99h59min, continuously adjustable.
Illumination time	Can be programmed continuously
Blackboard temperature	65±3℃ (not within the measurement range)
Cooling method	Mechanical cooling and air cooling
Total power and power supply	about 8.5KW; 380V±10% 50HZ
The main technical parameters of the above products are measured at room temperature below 26℃, relative humidity ≤85%R.H, and no-load working room, after two hours of constant temperature and humidity.

Application Areas

Xenon Arc Chamber can be used for tests such as the selection of new materials, the improvement of existing materials or the evaluation of changes in durability after changes in material composition; suitable for plastics, rubber, paints , Paint, ink, paper, medicine, food, cosmetics, textiles, auto parts, packaging materials, construction materials, electrical and electrical products, etc.

Hot Tags: xenon arc chamber, China, suppliers, manufacturers, factory, buy, cheap, IC PCB Semiconductor Tester, High Temperature Aging Chamber, Paper Aging Test Chamber, Automobile Parts aging test tequipment, Holding Test Chamber, Yellowing Resistance Room