Simply Talk About What Is A Rapid Temperature Change Test Box

Mar 05, 2021 Leave a message

Rapid temperature change test chamber: It is suitable for aerospace products, information electronic instrumentation, data, electrical engineering, electronic products, various electronic vitality parts, in high and low temperature or humid and hot environments, to check their various functional items.


1) Principle of refrigeration operation:

Both high and low temperature refrigeration cycles use the reverse Karo cycle, which consists of two isothermal processes and two adiabatic processes. The process is as follows: the refrigerant is adiabaticly compressed by the compressor to a higher pressure, which consumes work to increase the temperature of the exhaust gas, and then the refrigerant exchanges heat with the nearby medium through the condenser isothermally, and transfers the heat to the nearby medium. After the refrigerant expands through the valve adiabatically, it does work. At this time, the refrigerant temperature drops. Finally, the refrigerant absorbs heat isothermally from the higher temperature object through the evaporator, so that the temperature of the cooled object drops. This cycle goes back and forth and then reaches the intention of cooling down.


2) Refrigeration system:

1. Refrigeration system and compressor: In order to ensure the cooling rate and minimum temperature requirements, this test box uses a set of dual cascade air-cooled refrigeration system composed of Taikang hermetic compressors. The cascade refrigeration system includes a high-temperature refrigeration cycle and a low-temperature refrigeration cycle. The connecting container is a transpiration condenser. The transpiration condenser also has the effect of energy transfer. The heat energy in the operating room is transmitted through the two-stage refrigeration system to complete the temperature rise. intention of. The description of the refrigeration system applies energy conditioning skills. An effective treatment method can not only ensure that the refrigeration system is in normal operation, but also can effectively adjust the energy consumption and refrigeration capacity of the refrigeration system, so as to make the operation cost and failure of the refrigeration system. The rate dropped to a more economical situation.

2. Refrigerant: Choose R404 (high temperature cycle) and R23 (low temperature cycle) from DUPONT.

3. Auxiliary parts: expansion valve (Danfoss, Denmark), solenoid valve (CASTEL, Italy).

4. Filters (American Aiko); oil separator (Taiwan crown pressure) and other test chamber refrigeration accessories are all imported parts.


Send Inquiry

whatsapp

Phone

E-mail

Inquiry