Antifreeze
In winter, as the air temperature decreases, when the measured medium is transmitted to the transmitter through the measuring pipeline, it often occurs that the ambient temperature is too low to freeze, solidify, and crystallize, and the ambient temperature is too low to exceed the range of the instrument used. The normal working temperature range directly affects the accuracy of the instrument measurement display. Therefore, every year - in winter, the cold and antifreeze work of instruments and meters is particularly important.
Tips:
When selecting an instrument, the laboratory proposes the insulation and antifreeze requirements of the instrument according to the type of use and the geographical location to be installed, and then submits it to the manufacturer for processing. (Metaanalysis Instruments will reasonably recommend instruments and after-sales detailed operation and maintenance services for you according to the site conditions in different regions)
Use thermal insulation materials to wrap the parts of the instrument that are prone to freezing or are afraid of freezing. When winter comes, check and drain frequently to prevent damage to the thermal insulation materials of the packaging. If the laboratory does not have insulation facilities, it is better to add homemade insulation covers or use plastic foam insulation for temperature-sensitive instruments.
Pre-checks should be carried out on temperature control instruments, humidity controllers and other equipment, instruments, and appliances that affect the environment to prevent abnormal conditions from affecting normal inspection work.
Anti-static
Static electricity is a common phenomenon in winter, whether it is the human body, equipment or facilities, it is easy to generate static electricity.
Generally speaking, static electricity will not cause harm, but it is also necessary to prevent fires, explosions and personal injury accidents caused by static electricity. Especially for some unstable reagents or other flammable and explosive materials. Therefore, in the laboratory in winter, strict attention must be paid to fire safety.
To strengthen the management of fire use, chemical production exothermic chemical reaction, refining, drying and other operating positions must strictly implement fire prevention regulations to reduce the occurrence of disasters and accidents
Metal sodium, potassium, aluminum powder, calcium carbide, yellow phosphorus and metal hydrides should be used and stored with care, especially should not be in direct contact with water to avoid burning and explosion.
In case of fire, judge the situation calmly and take appropriate measures to extinguish the fire; according to different situations, sand (generally prepared with gravel), foam, CO2 or CCI4 fire extinguishers can be used to extinguish the fire.
Pay attention to ventilation
In winter, in order to keep warm, people like to close the doors and windows, resulting in dirty indoor air. However, in the process of chemical experiments, various unpleasant, corrosive, toxic or explosive gases are often produced. If these harmful gases are not discharged outside in time, they will cause indoor air pollution and affect the health of experimenters. and security. Therefore, in winter, laboratory personnel must not reduce the ventilation of the laboratory due to the cold.
In an environment where toxic and harmful gases such as carbon monoxide are produced, the laboratory should also be equipped with a gas leakage alarm device while doing a good job of ventilation.
The laboratory ventilation requires all fresh air to come from the outside, and 100% of the indoor air is exhausted outside. The chemical laboratory requires more than 10 air changes per hour, and the air change can be reduced to 6 times when the laboratory is empty.
When laboratory personnel enter the laboratory, they should open the windows for ventilation, and strengthen the inspection of the gas supply pipeline to prevent the accumulation of combustible gas in the room.
The exhaust of laboratory fume hoods is not allowed to circulate indoors. The number of fume hoods should be designed to be sufficient and not used as an indoor exhaust device for weivi. A local exhaust system should be installed above the instrument room or the instrument that produces hazardous substances.




