1. Automatic clearing: the test system automatically clears after the test starts; 2. Automatic shifting: automatically switches to the appropriate range according to the load size to ensure the accuracy of the measurement data;
3. Automatic calibration: the system can automatically realize the calibration of the accuracy of the indication;
4. Automatic saving: test data and test curves are automatically saved to avoid data loss caused by forgetting to save;
5. Automatic test: After the test setting is over, the test process can be completed automatically;
6. Test software: using Chinese winXP/2000 operating system, menu prompts, mouse selection, simple and convenient operation;
7. Display mode: data and curve are displayed dynamically along with the test process;
8. Curve traversal: After the test is completed, the curve can be re-analyzed, and the data of each corresponding point on the test curve can be found directly with the mouse;
9. Curve selection: The stress-strain and force-time curves can be selected for display and printing according to user requirements;
10. Batch test: For samples of the same specification, one batch of tests can be automatically completed at one time;
11. Automatic printing: After the test is over, the test results can be automatically printed;
12. Real-time display: test force and test force peak value can be displayed in real time;
13. Limit protection: There are two limit protections: program control and mechanical;
14. Overload protection: When the load exceeds 2-5% of the maximum value, it will automatically stop;
15. Data processing: The peak value of the test force and the force value of the breaking point can be printed and recorded;