Products Description
Xenon lamp aging test chamber is a test equipment used to simulate and intensify natural light conditions to accelerate material aging. It's an indispensable test equipment for light aging test.
The equipment uses a xenon arc lamp as a light source, which can simulate the full sunlight spectrum to reproduce the destructive light waves present in different environments. In this way, the test chamber can provide corresponding environmental simulation and accelerated testing for scientific research, product development and quality control. The xenon lamp aging test chamber is designed to simulate the light, temperature and humidity conditions in the natural environment to accelerate the aging process of the material, so as to evaluate the weather resistance and reliability of the product.
Applications
This equipment is widely used to test the light stability and aging resistance of materials and products, including but not limited to the weather resistance of plastics, rubber, paint, ink, paper, coatings, medicines, food, cosmetics, automotive accessories, textile printing and dyeing, etc.
Standard
IEC 68-2-9, Basic Environmental Testing Procedures-Part 2:Guidance for Solar Radiation Testing
ISO 4892-1, Plastics-Methods of exposure to laboratory light sources-Part 1: General Guidance
ASTM G151, General Guidelines for Exposure of Nonmetallic Materials
ASTM G155, Xenon-Arc Test Apparatus for Exposure of Nonmetallic Materials
ISO 105-B02, Textiles - Color fastness test - Color fastness to light: Daylight
ISO 3865, Rubber, Vulcanized or Thermoplastic - Methods of test for staining on contact with organic materials
ISO 4665, Rubber, Vulcanized or Thermoplastic - Resistance to weathering
ISO 4892-2, Plastics-Methods of exposure to laboratory light sources-Part 2: Xenon-arc sources
JIS K 7350-2, Plastics-Methods of exposure to laboratory light sources-Part 2: Xenon-arc sources
DIN EN 513, Unplasticized polyvinylchloride (PVC-U)profiles for fabrication of windows & doors
ASTM D1248 , Polyethylene Plastic Extrusion Materials for Wire a nd Cable
ASTM D2565 , Xenon-Arc - Plastics for Outdoor Applications
ASTM D4101, Polypropylene Plastic Injection a nd ExtrusionMaterials
ASTM D4459 , Xenon-Arc - Plastics for Indoor Applications
ASTM D5071, Xenon-Arc Exposure of Photodegradable Plastics
ASTM D6662, Plastic Lumber Decking BoardsUL 1581, Reference Standard for Electrical Wires, Cables & Flexible Cords
SAE J2412, Accelerated Exposure of Automotive Interior TrimComponents Using a Controlled Irradiance Xenon-ArcApparatus
SAE J2527, Accelerated Exposure of Automotive ExteriorMaterials Using a Controlled Irradiance Xenon-Arc ApparatusQB/T 2727
ASTM D7356, Standard Test Method for Accelerated Acid EtchWeathering of Automotive Clearcoats Using a Xenon-ArcExposure Device
ISO 11341, Paints a nd varnishes - Artificial weathering a nd exposure to artificial radiation-Exposure to filtered xenon-arc radiation
ASTM D3451, Testing Coating Powders a nd Powder Coatings
ASTM D3794, Testing Coil Coatings
ASTM D6577, Standard Guide for Testing Industrial Protective Coatings
ASTM D6695, Xenon-Arc Exposures of Paints a nd Related Coatings
UL 2556 , ASTM G155, CSA C22.2
GB12831-86 vulcanized rubber artificial climate (xenon lamp) aging test method
GB/T1644.2-1999 Plastic Laboratory Light Source Exposure Test Method (Part 2: Arc Xenon Lamp)
GB/T8427-89 Textile color fastness test, color fastness to artificial light xenon arc
GB/T8430-98 Textile color fastness test, color fastness to artificial light xenon arc
GB/T1865-97 Paints, varnishes, artificial weathering and artificial radiation exposure (filtered xenon arc radiation)
GB/T16991-97 Textile Color Fastness Test Color Fastness to High Temperature Light: Xenon Lamp
GB/T5137.3-96 Test Method for Resistance to Radiation, High Temperature, Humidity, Combustion and Weather Simulation of Automobile Safety Glass
GB/T16259-96 Colored building materials, artificial climate acceleration, color aging test method.
GB/T2423.24-95 Environmental Test of Electronic and Electrical Products Part 2: Test Method, Test SQ: Simulate solar radiation on the ground.
Technical specification
|
Inner size W×H×D |
500×600×500 mm |
|
External size W×H×D |
750×1670×1050mm |
|
Temperature range |
RT.～80℃ |
|
Temperature deviation |
±2℃ (without lighting) |
|
Humidity range |
50%～98％R.H |
|
Humidity deviation |
±2.5%R.H(humidity≥75%R.H) ±3%R.H(humidity≤75%R.H) (without light) |
|
Type of light source |
Imported air-cooled full solar spectrum long arc xenon lamp (average service life is about 1500 hours) |
|
Rain time |
1～9999 minutes, adjustable |
|
Rain cycle |
1～240 minutes, interval (break) adjustable |
|
Spectral wavelength |
290nm～800nm |
|
Xenon lamp power |
1KW, 2.5KW (lifetime: 1500 hours) |
|
Irradiance range |
550W～1200W/㎡ adjustable |
|
Heating power |
about 4.6KW |
|
Humidification power |
about 3KW |
|
Light source irradiance |
Full spectrum 550W～1200W/㎡ (continuously adjustable); The energy compensation of the xenon lamp is realized by adjusting the voltage and current. |
|
The stage rotation speed is adjustable |
0-5 rpm (stepless speed regulation) |
|
Distance from arc center to sample holder |
350～380mm |
|
Rotating speed of sample rotating basket |
None |
|
Water spray time |
0～99h59min, continuously adjustable |
|
Stop spraying time |
0～99h59min, continuously adjustable. |
|
Illumination time |
Can be programmed continuously |
|
Blackboard temperature |
65±3℃ (not within the measurement range) |
|
Cooling method |
Mechanical cooling and air cooling |
|
Total power and power supply |
about 8.5KW; 380V±10% 50HZ |
|
The main technical parameters of the above products are measured at room temperature below 26℃, relative humidity ≤85%R.H, and no-load working room, after two hours of constant temperature and humidity. |
|
Function
◆ Full spectrum xenon lamp.
◆ A variety of filter systems to choose from.
◆ Water spray function.
◆ Relative humidity control.
◆ The air temperature control system of the test chamber.
◆ Irregularly shaped sample holder.
◆ Cheap and good quality xenon arc tube.
◆ It is easy to install and use and basically does not require routine maintenance.
◆ The service life of the xenon arc lamp tube depends on the level of irradiance used, and the life of the general lamp tube is 1600 hours. The lamp can be replaced quickly and easily, and the long-lasting filter provides a guarantee for maintaining the required spectrum.
Feature
1. Simulate full sunlight spectrum:
BOTO measures the light resistance of the material by exposing the material to ultraviolet (UV), visible light and infrared light. It uses filtered xenon arc lamps to produce a full sunlight spectrum with the greatest consistency with sunlight. The xenon arc lamp with reasonable filtering treatment is the best way to test the product's sensitivity to long-wavelength ultraviolet and visible light in direct light or sunlight through glass.
2. Light resistance test of indoor materials:
Due to long-term exposure to fluorescent lamps, halogen lamps or other light-emitting lamps, products placed in retail outlets, warehouses or other environments will also experience significant photo degradation. The xenon lamp test chamber can simulate and reproduce the destructive light in such commercial lighting environments, and can accelerate the test process with higher intensity.
3. Simulated climate environment:
In addition to the photo degradation test, the xenon lamp aging test chamber can also become a weathering test chamber by adding a water spray option to simulate the influence of outdoor moisture on the material.
4. Relative humidity control:
Some types of chambers can provide relative humidity control. For many humidity-sensitive materials, this function is also very important, and many test protocols also require humidity control.
who we are?
BOTO GROUP LTD. is a professional manufacturer of various kinds of testing equipments over 30 years, such as environmental test equipment, Industrial Hot Air Drying Ovens, UV Aging Test Chambers, Industrial Muffi Furnaces.
high quality
Advanced Equipment
ProfessionTeam
One-Stop Solution
high quality
Our test chamber use imported components, are sturdy and durable, and the equipment life can reach more than 10 years!
advanced equipment
Our equipment includes CNC Machine, Fully automatic laser cutting machine, Laser cutting machine, etc., ensuring that our testing equipment meets the highest quality standards and performance.
professional team
From customer inquiry to formulating technical solutions, quotations and signing contracts, and from manufacturing to after-sales service, our professional team will solve all your needs at every stage!
global shipping
We have a mature logistics system. No matter which country you are in, we can deliver the equipment to where you need it!
Our Partners
BOTO GROUP with a good reputation,excellent quality and sound after-sales service to win the world praise,in many domestic and foreign enterprises shine!
Hot Tags: xenon lamp aging test chamber, China, suppliers, manufacturers, factory, buy, cheap
