video
Water Spray Test Chamber

Water Spray Test Chamber

Water Spray Test Chamber is a testing device that uses artificially atomized salt water and a constant-temperature environment to accelerate the assessment of the corrosion resistance and lifespan of products such as metals and coatings.

Product Introduction
Products Description

 

Water Spray Test Chamber is a precision testing instrument designed to simulate marine or high-humidity, salt-laden environments. By atomizing a 5% sodium chloride solution into a fine, evenly distributed mist, the chamber subjects products-such as metals, electroplated components, and coatings-to accelerated corrosion testing at a constant temperature. This process allows for a rapid assessment of a product's weather resistance and service life, and is widely used in industries including automotive, electronics, and hardware manufacturing.

 

Working Principle

 

The Water Spray Test Chamber mainly working principle as below:

Compressed Atomization: Filtered compressed air is discharged at high velocity, creating negative pressure that draws up the sodium chloride solution and breaks it down into fine mist droplets.
Natural Sedimentation: The salt mist permeates the enclosed test chamber, settling uniformly onto the surfaces of the test specimens under the influence of gravity.
Constant-Temperature Acceleration: A heating system maintains a steady temperature within the chamber, creating a warm, humid environment that accelerates the corrosion process.
Sealed, Anti-Drip Design: A water-seal structure prevents the escape of salt mist, while the slanted lid design ensures that condensed water does not drip onto and interfere with the test.

 

 

Water spray test chamber

salt spray test chamber

 

 

Technical Specification

Model

B-SST-60

B-SST-90

B-SST-120

B-SST-160

B-SST-200

Inner size (cm)

60x45x40

90x60x50

120x100x50

160x100x50

200x100x50

External size(cm)

107x60x118

141x88x128

190x130x140

230x130x140

270x130x140

Inside temp

Brine test method(NSS ACSS)35°C±1°C/Corrosion resistance test method

(CASS)50°C±1°C

Brine temp

35°C±1°C 50°C±1°C

Test chamber volume

108L

270L

600L

800L

1000L

Brine chamber volume

15L

25L

40L

40L

40L

Compressed air pressure

 

1.00±0.01kgf/cm2

Spray volume

1.0~2.0ml/80cm2/h (Collect at least 16 hours, the average)

Test room relative humidity

 

85%RH or more

PH

6.5~7.2 3.0~3.2

Spray method

 

Programmable spray (including the continuous spray interrupted spray)

 

Power

AC220V1Φ10A

AC220V1Φ15A

AC220V1Φ20A

AC220V1Φ20A

AC220V1Φ30A

 

 

 

Meet Standards

 

The Water Spray Test Chamber can meet most of the relevant standards of salt spray testing,covers test methods such as neutral salt spray (NSS), acetic acid salt spray (AASS), and copper-accelerated acetic acid salt spray (CASS).

GB/T 10125: "Corrosion tests in artificial atmospheres - Salt spray tests" - the most common standard in China for salt spray testing of metals and protective coatings, which is technically equivalent to the corresponding international standard.

GB/T 2423.17 / GB/T 2423.18: Standards for environmental testing of electrical and electronic products, specifying methods for basic salt spray testing and cyclic (alternating) salt spray testing, respectively.

ASTM B117 (Standard from the American Society for Testing and Materials): The most authoritative and widely applied international standard for the operation of salt spray (fog) apparatus (primarily for neutral salt spray testing).

ISO 9227 (Standard from the International Organization for Standardization): "Corrosion tests in artificial atmospheres - Salt spray tests" - a core global standard that covers neutral salt spray, acetic acid salt spray, and copper-accelerated salt spray tests.

JIS Z 2371 (Japanese Industrial Standard): "Methods of salt spray testing" - widely adopted within supply chains for Japanese products, such as automotive components and electronic/electrical equipment.

 

 

Application Scenarios

 

1. Automotive and Parts Manufacturing
Vehicles are frequently exposed to outdoor environments, enduring harsh conditions such as rain, snow, road salts used for de-icing in winter, and coastal salt spray. Metal components are highly susceptible to corrosion, which can compromise safety.
Typical test subjects: Vehicle body sheet metal, chassis suspension components, fasteners/screws, wheel hubs, windshield wipers, engine housings, automotive electronic wiring harness connectors, etc.

2. Electronics, Electrical Appliances, and Semiconductors
If salt spray penetrates electronic devices, it can cause micro-short circuits, corrosion of copper foil on circuit boards, and poor contact at connectors. This may lead to equipment malfunctions or, in severe cases, short circuits and fires.
Typical test subjects: Metal casings for mobile phones/computers, PCBs (testing of moisture-proof coatings), connectors, switches and sockets, outdoor surveillance cameras, outdoor LED lighting, etc.

3. Hardware, Metal Processing, and Electroplating/Coating
Industries in this sector rely on surface treatments-such as electroplating, anodizing, black oxide finishing, or spray coating-to enhance product value and durability. They must demonstrate to downstream clients that their coatings are of sufficient thickness and offer robust rust resistance.
Typical test subjects: Door and window locks, faucets and bathroom fixtures, metal tools, hinges, galvanized sheets, and various spray-coated metal samples.

4. Aerospace, Marine, and Offshore Engineering
Marine environments-characterized by high salinity and high humidity-are extremely corrosive. For assets like offshore platforms, ships, and coastal airport infrastructure, corrosion resistance is critical to product safety and regulatory compliance.
Typical test subjects: Marine hardware, aircraft structural components, anti-corrosion coatings for offshore equipment, and housings for communication and radar systems.

5. Coatings, Chemicals, and New Materials R&D
When developing new anti-corrosion paints, coatings, or alloys, chemical companies utilize accelerated laboratory testing to verify performance.
Typical test subjects: Test panels, new anti-rust oils/agents, modified plastics, and composite materials.

Hot Tags: water spray test chamber, China, suppliers, manufacturers, factory, buy, cheap

Send Inquiry

whatsapp

Phone

E-mail

Inquiry

Bag