Products Description
Temperature cycling chamber(High and low temperature cycle test chamber), simply put, is a device that can simulate a variety of extreme temperature environments. It can quickly switch between high and low temperature in a short time, allowing products to be tested under different temperature conditions. Whether it is a blistering high temperature environment, or a freezing low temperature environment, this test chamber can easily simulate.
Product advantage
What can the Temperature cycling chamber bring to us?
For product developers, it is an indispensable right-hand man. In the product development stage, through the use of Temperature cycling chamber, you can find out in advance that the product may occur in different temperature environments. For example, whether electronic devices will crash at high temperatures, and whether the battery's endurance at low temperatures will be significantly reduced. Only by discovering and solving these problems in advance can we ensure the quality and reliability of the products after they are launched, and reduce the cost and risk of after-sales maintenance.
For production enterprises, the Temperature cycling chamber is the key equipment to ensure product quality. By sampling and testing the products on the production line, enterprises can find the quality problems that may occur in the production process in time to avoid unqualified products entering the market. This not only helps to improve the brand image of the company, but also enhances the trust of consumers in the company's products.
Our Temperature cycling chamber, its advantages are very obvious - its temperature control accuracy is very high, can be accurate to ±0.5℃, to ensure the accuracy and reliability of each test. In addition, its heating and cooling speed is very fast, and it can complete the cyclic change of temperature in a short time, which greatly improves the test efficiency. Moreover, this test box also has perfect safety protection functions, such as over-temperature protection, leakage protection, etc., so that you have no worries during use.
In addition, our Temperature cycling chamber is easy to operate, even for people without professional knowledge. At the same time, we also provide high-quality after-sales service, at any time for you to solve the problems encountered in the process of use.
Product parameter
|
Model |
BT-280 |
BT-2150 |
BT-2225 |
BT-2408 |
BT-2800 |
|
|
Inner Size W×H×D(cm) |
40×50×40 |
50×60×50 |
50×75×60 |
60×85×80 |
100×100×80 |
|
|
Outside Size W×H×D(cm) |
93×155×95 |
100×148×106 |
117×166×91 |
140×176×101 |
170×186×111 |
|
|
Volume (V) |
80 L |
150L |
225L |
408L |
800L |
|
|
Temp and Hum Range |
A:-20°C~150°C B: -40°C~150°C C: -60°C~150°C D: -70°C~150°C RH20%-98% |
|||||
|
Function |
Fluctuation |
±0.5°C ±2.5%RH |
||||
|
Deviation |
±0.5°C-±2°C ±3%RH(>75%RH); ±5%RH(≤75%RH) |
|||||
|
Controller Analytical Accuracy |
±0.3°C ±2.5%RH |
|||||
|
Wind Cycling Way |
Centrifugal fan-broadband type forced air circulation |
|||||
|
Refrigeration Way |
Single stage compression refrigeration |
|||||
|
Refrigerator |
French Tecumseh |
|||||
|
Refrigerants |
R4O4A USA DuPont environmental protection refrigerant(R23+R404) |
|||||
|
Condensing Way |
Air-cooled or water-cooled |
|||||
|
Water Supplying Way |
Automatic cycling water supply |
|||||
|
Safety device |
Non- fuse-switch(compressor overload, refrigerant high low voltage, over-humidity and temperature protection, Protection switch,fuse stoppage warning system |
|||||
Hot Tags: temperature cycling chamber, China, suppliers, manufacturers, factory, buy, cheap, Heating Drying Oven, PCB BGA Substrate Impact Testing Chamber, Electric Air Ventilation Aging Testing Chamber, Continuity Thermal Shock Tester, Ultraviolet testing machine, Rubber and plastic abrasion resistance tester
