The aging of rubber polymer materials is usually inseparable from the aging test chamber. The ozone aging test chamber is an essential test equipment for rubber materials. The ozone aging test chamber can detect the reliability of rubber products, detect their defects, and then improve and enhance product competitiveness, thereby helping companies control costs and increase profits.
BOTO is a manufacturer specializing in the production of environmental testing equipment with more than 20 years of industry experience. The temperature and humidity test chamber series, aging test chamber series, mechanical environmental testing machine and other series of test chambers are our advantageous products. If you have any needs, please contact us in time.
Products Description
The ozone content in the atmosphere is very small, but it is the main factor causing rubber cracking. The ozone aging test chamber simulates and strengthens the ozone conditions in the atmosphere, studies the effect of ozone on rubber, and quickly identifies and evaluates the anti-ozone aging performance of rubber and the protective effectiveness of anti-ozonants, and then takes effective anti-aging measures to extend the service life of rubber products.
Products Uasge
The equipment used to test the ozone aging resistance of rubber and its products complies with (meets) relevant standards: JIS K 6259 ASTM1149 ISO1431 GB/T7762 GB/T13642, etc.... Mainly a toolbox used for antioxidant testing.
The test is divided into two types
1. Speed regulating motor drives the sample holder device (meets the static tensile test, and the specimen running trajectory meets the cycloid trajectory principle).
2. Automatic digital display controller for ozone concentration.
3. Double beam "QUA" non-dispersive ultraviolet ozone detector.
4. Digital automatic online measurement.
5. A measurement verification and correction interface is reserved.
6. Ozone concentration/temperature and humidity set value control PID self-tuning, convenient and reliable operation.
Features
1. Air circulation device: built-in circulating air duct, the test airflow is evenly parallel to the surface of the test piece from top to bottom, in line with international standards.
2. Adopt integrated ozone concentration, temperature and humidity controller (setting method is touch button type), high integration, good reliability, LED display, display resolution temperature (0.1℃), humidity (0.1%RH), ozone concentration (1pphm), PID set value control, easy operation.
3. The electromagnetic air pump provides high-quality air source, oil-free drying, to ensure the long-term reliability of the air system.
4. The dual-light-speed ultraviolet ozone detector is an instrument for detecting ozone in accordance with internationally recognized standards developed by Shanghai University and our company in technical cooperation. It has stable performance, automatic zeroing control, ozone-free cold light source ultraviolet lamp has a long life and high precision. Bill-Lambert digital system measurement software, accurate and reliable.
5. The equipment has the following safety protection devices:
5.1 Power overload, short circuit protection
5.2 Control circuit overload, short circuit protection, grounding protection.
5.3 Overtemperature protection, alarm sound prompt, water shortage protection
Ozone system
Due to the medium-frequency high-voltage power supply mode, the electrode will not produce corona overheating, so the generated ozone concentration is stable and will not decrease with the working time or the high or low gas flow rate. However, the high-frequency surface discharge ceramic corona generator uses high-frequency voltage discharge. When the temperature in the discharge area cannot be effectively dissipated, ozone will decompose due to overheating. It is suitable for use under high airflow conditions.
It adopts an integrated ozone concentration, temperature and humidity controller (the setting method is a touch button type), with high integration and good reliability. LED display, display resolution temperature (0.1℃), humidity (0.1%RH), ozone concentration (1pphm), PID set value control, easy operation
No vulnerable components, maintenance-free operation, long life. However, the surface of the ceramic electrode of the high-frequency surface discharge ceramic corona generator is prone to oxidized attachments. When the surface oxide is too thick, it is easy to produce corona occlusion. If it is not cleaned in time, ozone will not be produced.
Corresponding standards
JIS K 6259 , ASTM1149 , ASTM1171, ISO1431, DIN53509 , GB/T13642, GB/T 7762-2003, GB 2951,etc.
Technical Parameters
|
Working size |
400mm × 400mm × 500mm (depth × width × height) |
|
Ozone concentration range |
25pphm ~ 800pphm (adjustable) |
|
Temperature range |
RT +10 ℃ ~ 60 ℃ (adjustable) |
|
O3 concentration fluctuation deviation |
± 10% |
|
Temperature uniformity |
± 1 ℃ (no load) |
|
Temperature fluctuation |
± 1 ℃ (no load) |
|
Timing range |
0 ~ 999 hours (adjustable) |
|
Power |
AC220V ± 10% 50Hz |
|
Weight |
About 200kgs |
BOTO GROUP LTD. is a professional manufacturer of various kinds of testing equipments for more than 20 years.
If you have any questions, welcome to our factory for guidance!
Hot Tags: ozone test chamber rubber polymer materials aging test equipment for aging testing, China, suppliers, manufacturers, factory, buy, cheap, High Stability Environmental, High Temperature Oven, Yellowing Resistance Room, Compound salt spray chamber, Stable and reliableTest Chamber, High Pressure Aging Tester
