Our company's goal is to attract our customers and expand the world Rapid-Rate Thermal Cycle Chamber, Rubber aging test tequipment, Automative lighting Test Chamber market. Integrity is an important intangible asset of our company and we insist on winning customers with integrity. What we rely on is not only the company's strong technology and research and development strength, but also our sincere and sincere service to customers.

High pressure accelerated life testing machine laboratory equipment testing equipment lab machine PCT pressure chamber

Temperature & Humidity Test Chamber, High Temperature Test Chamber, Dry Oven, Alternating Temperature Test Chamber, Alternating Temperature & Humidity Test Chamber, Temperature Rapid Change Test Chamber, Temperature & Humidity Rapid Change Test Chamber, Alternating Temperature Alternating Humidity Rapid Change, Thermal shock Test Chamber(Two-zone, Three-zone), Large Walk-in Test Room

It is mainly used to test the physical and other related properties of electrical, electronic products, components, parts, metal materials and their magnetic materials under the simulated climate conditions of high temperature, high temperature, high humidity and pressure, judge whether the performance of products can meet the requirements through verification, and provide help for the design, improvement, verification and delivery inspection of products.

DSCN7824_(001)

1. Material:

1.Test box size: PCT-30 (300x L500 mm), round test box

2. Overall dimensions: 900x 900 x 1600 mm (W * D * H)

3. Inner barrel material: stainless steel plate (SUS # 316 3 mm) or plastic spray

4.Outer barrel material: stainless steel plate material

5. Insulation material: rock wool and rigid polyurethane foam insulation

6. Steam heating chamber heating tube: titanium tube heating, never rust.

7. Control system:

a. Use touch controller to control test temperature, time and information query and data export.

b. Use the pointer to display the pressure gauge.

c. Microcomputer P. I. D automatic calculation to control the temperature of saturated steam.

d. Manual water inlet valve (automatic water supply function, continuous test without stopping). Inquiry.

8. Mechanical structure:

a. Round inner box, stainless steel round test inner box structure, in line with industrial safety container standards, can prevent dew dripping during the test.

b. The circular web lining and stainless steel circular web lining design can avoid the latent heat of steam directly impacting the test product.

c. Precision design, good air tightness, low water consumption, continuous 400Hrs operation with each water addition.

d. The patented packing design makes the door and the box more closely integrated, which is completely different from the traditional squeeze type, which can extend the packing life.

e. Critical point LIMIT mode automatic safety protection, abnormal cause and fault indicator display.

9. Security protection:

a. The imported high temperature resistant sealed solenoid valve adopts a double circuit structure to ensure no pressure leakage.

b. The whole machine is equipped with multiple pressure protection devices such as over-pressure protection, over-temperature protection, one-button pressure relief, and manual pressure relief to ensure the user's use and safety to the greatest extent.

c. Back pressure door lock device, when there is pressure in the test chamber, the test chamber door cannot be opened

1621144806(1)

2. Main accessories table:

Thermostat: Touch controller

Test temperature record U disk export (standard configuration)

Computer online control (optional)

High temperature and high pressure water level device: Taiwan Hongyu

High temperature solenoid valve: German herion

Relay: Japan Omron

Pressure Gauge: China Red Flag

Over temperature protector: Korea AGO

S. S. R: Taiwan is famous

Temperature and humidity sensor: VAISALA, Netherlands

Heater: self-produced (all titanium tube)

Pressure safety device: self-produced (copper spring type)

High pressure clean water pump: (Germany) PUM

Hose: Nissan Aseptic

Cabinet material (inner barrel): SUS316

Outer box material: SUS304

Sealing ring: Silicone V-shaped mold

1621144858(1)

)(001)

Features:

1. Adopting dual-circuit structure of imported high temperature-resistant solenoid valve, which reduces the failure rate to the greatest extent.

2. Independent steam generation chamber, avoid direct impact of steam on the product, so as not to cause partial damage to the product.

3. The labor-saving structure of the door lock solves the shortcomings of the disc-type handle of the first generation product which is difficult to lock.

4. Exhaust the cold air before the test; the design of the exhausted cold air (exhaust air in the test barrel) during the test improves the pressure stability and reproducibility.

5. Ultra-long-term experiment running time, long-term experiment machine running for 1000 hours.

6. Water level protection, detection and protection through water level sensor in the test room.

7. tank pressure resistance design, the pressure resistance of the cabinet (140 ℃) is 2. 65kg, which meets the water pressure test of 6kg.

8. Two-stage pressure safety protection device adopts two-stage combination controller and mechanical pressure protection device.

9. Safety protection pressure release button, two-stage automatic pressure release button of emergency safety device

10. Full touch controller, support U disk export history

Product parameters:

Model
Studio size	PCT40: 400mm x L500 mm round test chamber
Performance	Temperature and humidity range	+100 °C ~ +135 °C (saturated vapor temperature), 100 vapor humidity
	Temperature fluctuation	±0.5°C
	Humidity distribution mean	3%
	Pressurization time	0.00 Kg ~ 1.04 Kg / c㎡ Approximately 45 points
	Temperature display accuracy	0.1 ° C
	Pressure fluctuation	±0.02Kg
Temperature and humidity operation control system	Controller	Imported LCD digital display P, I, D + S, S, R. Micro PLC + color touch screen
	Range of accuracy	Setting accuracy: temperature ±0.1 °C, indicating accuracy: temperature ± 0.1 ° C, resolution: ± 0.1 ° C
	Temperature Sensor	Platinum resistance PT100Ω
	Heating system	Fully independent system, nickel-chromium alloy electric heating heater
	Circulatory system	Steam convection hot row
Material used	Outer box material	High quality carbon steel plate. Phosphating electrostatic spray treatment / SUS304 stainless steel matte line hairline treatment
	Inner box material	SUS304 stainless steel high quality mirror light panel
	Insulation material	Polyurethane rigid foam, ultra-fine glass fiber cotton
Standard configuration	1 sample rack, 3 layers of partition
safety protection	Overvoltage, short circuit, over temperature, over current protection
voltage	AC220V/ 50±0.5Hz single phase
Note: 1. The above data are all at ambient temperature (QT) 25 ° C. Under no load conditions in the studio 2. Can be customized according to the specific requirements of users, non-standard high and low temperature, low temperature laboratory

1625493821(1)

1625488117(1)

We will continue to introduce technology to continuously optimize and improve our Sipotek Wafer Semiconductor Testing Equipment, so that more customers can trust us. We have many years of production experience, we are familiar with the international standard product process. Our company has all kinds of advanced equipment and production lines required as well as a group of experienced technical personnel and management personnel. Sophisticated testing equipment and strict quality management ensure the stability and continuous improvement of product quality.

Hot Tags: PCT test chamber, China, suppliers, manufacturers, factory, buy, cheap, Lockable bin conveyor belt metal detector, Automative lighting Test Chamber, Metal Detector Machine, Food metal detector, Biochemistry incubator, Semiconductor materials Test Chambers