We will continue to introduce more new technologies and optimize them so that more customers will be satisfied with our Temperature Rapid Change cycle chamber, CO2 Cell Incubator, Drying Oven. Our items have exported to many countries all over the world. We make integrity a moral belief that all employees consciously abide by, and throughout the whole process of enterprise development. We always adhere to the people-oriented and inclusive talent concept, and have gathered a group of high-quality R&D, marketing, and operation management talents.
Product description:
1. Test physical changes of IC, PCB, ceramic semiconductors and other high polymer materials.
2. High and low temperature liquid tanks use forced mixing convection way.
3. Automatically move testing samples from up to down or left to right to preheating, precooling.
4. Use Garden D02TS in hot and cold chambers to reduce the cost.
5. Japan imported LCD touch screen controller.
6. Suitable for water cooling and air cooling.
7. Optional accessories: Temp. recorder and solution.
Liquid type thermal shock chamber specification:
Model | BT-O-01 | BT-O-02 |
Method | Immersion in liquid bath by movement of a sample basket rack | |
Internal Dim.W×H×D(MM) | 200×350×300×2Bath | 260×350×450×2Bath |
Temperature rise time (high temperature bath) | Room temperature to +150°C within 120 minutes | |
Temperature rise time (low tempreature bath) | Room temperature to -65°C within 120 minutes | |
Precool/Preheat Temp.Range | -75.00°C~00.00°C/+600.00°C~160.00°C | |
Shocking Temp.Tange | -65.00°C~00.00°C/+600.00°C~150.00°C | |
Testing Time | 5min | 5min |
Movement Time | Approx.10 seconds | |
Resolution | 0.1°C / 1 min | |
Control Constancy | ±0.2°C | |
Sample basket Kim.W×H×D( mm ) | 10×18×20 | 16×18×35 |
Sample Weight | 1C 2Kg | 1C 5kg |
Controller | 1P | |
Power Source.[K.W.] | AC 1Ψ 220V;3Ψ 380V 60/50Hz | |
Application:
Physical change test of electronic chip IC, PCB, semiconductor ceramic and polymer materials. The high and low temperature liquid tank adopts the forced stirring convection method. The full-automatic up, down, left, and right displacement mechanism is used to move the sample basket to the preheating and pre-cooling troughs, with a round-trip impact. Hot kerosene uses a single same liquid GARDEN D02TS in the high and low temperature tank, reducing the cost of frequent liquid replacement. It adopts the original large LCD Chinese/English display temperature programmable microcomputer controller.
Description:
Automatic Steam Aging Testing Chamber is used to test and determine the parameters, performance of electrical, electronics, other products and materials for high temperature, low temperature, or the temperature of the thermostat test environmental changes. And also is used in electronic connector, semiconductor IC, transistors, diodes, LCD LCD, chip resistance capacitance and components industry electronic components metal pin wetting resistance test before the aging accelerated life time test; Semiconductor and passive components, parts pin oxidation test.
China technical high Accuracy Temperature environment climatic test chamber is available as standard products in a variety of sizes to suit your needs. Our environmental test chambers are often used for steady-state stability testing, basic temperature cycling and accelerated stress testing. In keeping with the needs of today's lab, we designed these temperature and humidity test chambers to have a compact exterior that maximizes the interior workspace.
Lowest temperature: -20 or -70°C (-4 or -100°F)
Highest temperature: 150°C (302°F)
Humidity range: 10 to 98% RH
Chamber size: 5.3 cubic feet
Touch-screen Watlow F4T programmer with Ethernet access
Features:
1. Controlled by microcomputer digital LED.
2. Having time planning function.
3. Having safety device, including multi over-temperature protection and power off when out of water.
4. Testing high temperature/high humidity to spare pares, components.
5. Digital electronic indicators + S.S.R with PID automatic calculation capability.
6. Have time planning function, the maximum setting is 9990 minutes.
Let us produce prosperous future hand in hand for Mechanical Large Three-Axis Four-Axis Processing CNC Machined Medical Non-Standard Precision Aluminum Parts. Our company has professional staff in charge of product shaping, sample production and batch production. Our company takes the integrity first, the customer as the respect service tenet for the customer favor. Looking forward to the future, our colleagues are confident to serve customers with the best service and products.
Hot Tags: PCB test chamber, China, suppliers, manufacturers, factory, buy, cheap, Dust proof test equipment, Programmable High Low Temperature Chamber, Climate Anti Yellow Aging Test Chamber, Climate Test Cabinet, Coolingoff testTesting Equipment, Salt Spray Tester
