We have a series of Air Ventilation Accelerated Aging Test Chamber, Climatic Chamber, Rubber Aging test Chamber of different prices, styles and specifications, and customers can choose the products that suit them according to different needs. We lay a solid talent foundation for the leapfrog development of the company by cultivating internally, deepening the talent training system, and attaching importance to the improvement of the comprehensive quality ability and the deepening of professional skills of existing talents. We always strive for higher goals, and with courage and conviction, we create an enlightened workplace where everyone is treated with respect and value for their work, while maintaining a healthy mind and body. Our company has established long-term and stable cooperative relations with many retailers and agents. We have won the trust of the majority of customers by the principle of multi variety management characteristics and small profits and high sales. We constantly improve ourselves in the market, improve product quality, and gradually climb to a new level.
Product description:
1. Test physical changes of IC, PCB, ceramic semiconductors and other high polymer materials.
2. High and low temperature liquid tanks use forced mixing convection way.
3. Automatically move testing samples from up to down or left to right to preheating, precooling.
4. Use Garden D02TS in hot and cold chambers to reduce the cost.
5. Japan imported LCD touch screen controller.
6. Suitable for water cooling and air cooling.
7. Optional accessories: Temp. recorder and solution.
Liquid type thermal shock chamber specification:
Model | BT-O-01 | BT-O-02 |
Method | Immersion in liquid bath by movement of a sample basket rack | |
Internal Dim.W×H×D(MM) | 200×350×300×2Bath | 260×350×450×2Bath |
Temperature rise time (high temperature bath) | Room temperature to +150°C within 120 minutes | |
Temperature rise time (low tempreature bath) | Room temperature to -65°C within 120 minutes | |
Precool/Preheat Temp.Range | -75.00°C~00.00°C/+600.00°C~160.00°C | |
Shocking Temp.Tange | -65.00°C~00.00°C/+600.00°C~150.00°C | |
Testing Time | 5min | 5min |
Movement Time | Approx.10 seconds | |
Resolution | 0.1°C / 1 min | |
Control Constancy | ±0.2°C | |
Sample basket Kim.W×H×D( mm ) | 10×18×20 | 16×18×35 |
Sample Weight | 1C 2Kg | 1C 5kg |
Controller | 1P | |
Power Source.[K.W.] | AC 1Ψ 220V;3Ψ 380V 60/50Hz | |
Application:
Physical change test of electronic chip IC, PCB, semiconductor ceramic and polymer materials. The high and low temperature liquid tank adopts the forced stirring convection method. The full-automatic up, down, left, and right displacement mechanism is used to move the sample basket to the preheating and pre-cooling troughs, with a round-trip impact. Hot kerosene uses a single same liquid GARDEN D02TS in the high and low temperature tank, reducing the cost of frequent liquid replacement. It adopts the original large LCD Chinese/English display temperature programmable microcomputer controller.
Description:
Automatic Steam Aging Testing Chamber is used to test and determine the parameters, performance of electrical, electronics, other products and materials for high temperature, low temperature, or the temperature of the thermostat test environmental changes. And also is used in electronic connector, semiconductor IC, transistors, diodes, LCD LCD, chip resistance capacitance and components industry electronic components metal pin wetting resistance test before the aging accelerated life time test; Semiconductor and passive components, parts pin oxidation test.
China technical high Accuracy Temperature environment climatic test chamber is available as standard products in a variety of sizes to suit your needs. Our environmental test chambers are often used for steady-state stability testing, basic temperature cycling and accelerated stress testing. In keeping with the needs of today's lab, we designed these temperature and humidity test chambers to have a compact exterior that maximizes the interior workspace.
Lowest temperature: -20 or -70°C (-4 or -100°F)
Highest temperature: 150°C (302°F)
Humidity range: 10 to 98% RH
Chamber size: 5.3 cubic feet
Touch-screen Watlow F4T programmer with Ethernet access
Features:
1. Controlled by microcomputer digital LED.
2. Having time planning function.
3. Having safety device, including multi over-temperature protection and power off when out of water.
4. Testing high temperature/high humidity to spare pares, components.
5. Digital electronic indicators + S.S.R with PID automatic calculation capability.
6. Have time planning function, the maximum setting is 9990 minutes.
As one of the company's main products, Car Battery Electrical Test Equipment Hot And Cold Impact Testing Machine Thermal Cycling Chambers has obvious price advantages over peers, and cultivated a group of old customers who support each other, which makes our sales continue to rise and become stable. We firmly believe that being good to people, down-to-earth and pragmatic will win the trust of our customers. We are willing to continue to provide our customers with high-quality products and services with integrity and enterprising spirit, and make due contributions to the development of the industry.
Hot Tags: PCB test chamber, China, suppliers, manufacturers, factory, buy, cheap, furniture testing equipment, NDT Thickness Gauge, IPX34 rain waterproof Test Chamber, Material Strength Machine, Thermal shock tester, Hot selling Infraed co2 incubation control incubator
