Remark:

(1) Delivery cycle: delivery within 25 days after signing the contract.

(2) Delivery terms: FCA SHANGHAI

(3) Terms of payment: 50% deposit，50% before shipment

(4) Acceptance method: on-site acceptance.

(5) Warranty period: The whole machine is guaranteed for one year.

(6) After the expiration of the warranty: if the equipment is over-insured and needs to be repaired, we only recover the basic cost of production.

_20210617140018

(The reference picture is subject to the real object) _20210617140040

Description :

The machine can test a variety of shoes, leather, rubber, plastic, textile, metal, hardware, and aviation, packaging, construction, petrochemical, electrical, vehicles ┅, etc. Material of tensile extension, compression, bending, shear force, adhesive force,┅ peel, tear test, etc., for quality control, feed inspection, physical property test, mechanical research, material development of the basic equipment.This series of universal testing machine is suitable for rubber, plastic, textile, waterproof materials, wire and cable, wire, wire, metal wire, metal bar, metal plate and other materials of tensile test, add accessories can be compressed, bending test.It has the functions of digital display of test force, continuous adjustable test speed, automatic stop of specimen pulling, peak value keeping and so on.

1. Adopt high precision, full digital speed regulation system and precision reducer to drive precision lead screw pair for test Now the test speed of a wide range of adjustment, low noise test process, smooth operation.

2.The universal joint adoe cross pinpts th structure and has the function of swinging Angle limitation. On the one hand, it is convenient for sample clamping to ensure the test concentricity.

3. touch key operation mode, LCD real-time display.The display interface can display the test method selection interface,Test parameter selection interface, test operation and result display interface and curve display interface, convenient and quick.

4. can realize the sample clamping beam speed up and down adjustment, with over current, over pressure, overload and other protection devices.

Capacity	1-500N
peel test deg	180 and 90 deg
Force measurement accuracy	±0.5%
Measurement resolution	1/300000
Effective force measuring range	1～100%F.S
Accuracy of deformation indication	±0.5%
Test speed range	20～300mm/min(Arbitrary setting)
The unit switch	g，kg,N,LB,KN（We provide three kinds of international standard system, metric system and imperial system）

Stop method		Upper and lower limit safety setting, emergency stop button, program strength and elongation setting
The way of selecting knot		In the process of test, manual and preset points (20 points) can be used for holding tension and holding pressure tests
The machine size		750×600×1950mm(W×D×H)
Studio Size
Technology parameter	temperature range	RT+10℃～+150℃
	Temperature Stability/Uniformily	±0.5℃/2±℃
	heating rate	3℃/min nonlinearity
The body material	Outer box material	High quality imported cold rolled steel plate
	Inner box material	High quality stainless steel
	thermal insulation material	Super fine insulation cotton/hard polyurethane foam
	Door seal gasket	Double layer high and low temperature anti aging and hardening refined silicone sealing strip
Heat and cold exchange system	control instrument	Imported intelligent temperature control instrument
	control instrument	With the function of P.I.D automatic calculation, high precision
	temperature sensor	Platinum resistance PT100Ω/ mV
	circulatory system	Temperature resistant and low noise motor, single cycle, lengthened shaft, stainless steel multi-blade centrifugal blade

heating method	Isolated stainless steel heating tube
Timing function		0.1～999（M）
Security device		Power leakage, over - temperature protection, quick fuse
Ambient temperature		15℃～＋30℃≤85％R.H

Service：

1. The supplier's quality assurance system shall be implemented in strict accordance with the ISO2000 quality standard

2, training: according to customer requirements in the factory before the equipment or equipment on the scene, the technical personnel of the buyer into Conduct technical training on operation, maintenance and equipment maintenance

3. Service: When the equipment fails to work normally due to quality or other reasons, our company will be notified Reply within hours;When on-site maintenance is needed, our company shall 48 after receiving the notice Within hours, personnel will be sent to repair and detect

4. The equipment is guaranteed for one year

5. The equipment maintenance cost after the equipment exceeds the warranty period consists of: travel allowance + salary + round-trip transportation cost：The cost of + staff accommodation + the cost of replacement parts

Hot Tags: strength tester temperature and humidity chamber, China, suppliers, manufacturers, factory, buy, cheap,

Strength Tester Temperature And Humidity Chamber