Description
Xenon arc lamp can simulate the full sunlight spectrum to reproduce the destructive light waves in different environments, which can provide corresponding environmental simulation and accelerated test for scientific research, product development and quality control. The test equipment can be used for the selection of new materials, the improvement of existing materials or the evaluation of changes in the durability of material composition changes and other tests, the equipment can well simulate the changes of materials exposed to sunlight in different environmental conditions.
Usage
Xenon lamp aging test chamber adopts xenon arc lamp that can simulate the full sunlight spectrum to reproduce the destructive light waves existing in different environments:
1. It can provide corresponding environmental simulation and accelerated testing for scientific research, product development and quality control.
2. It can be used for the selection of new materials, the improvement of existing materials or the change test to evaluate the durability of material composition changes.
3. It can well simulate the changes caused by material exposure to sunlight under different environmental conditions.
4. If the test sample is not large or small, it is recommended to use a bench xenon lamp to achieve the same effect.
Basic principle
Xenon lamp weather test is an important means to optimize product composition in the process of scientific research and production, and is also an important content of product quality inspection. Application materials such as coatings, plastics, aluminum-plastic panels, and automotive safety glass and other product standards require weather test. The main factors that cause material aging are sunlight and humidity, and the weather resistance tester can simulate the damage caused by sunlight, rain and dew. Xenon lamp weathering test chamber uses xenon lamp to simulate the effect of sunlight, the use of condensed moisture to simulate rain and dew, the tested material is placed at a certain temperature in the cycle of alternating light and moisture for testing, with a few days or weeks to reproduce outdoor months or even years of harm, artificial accelerated aging test data can help select new materials, improve existing materials, And evaluate how changes in formulation affect the durability of the product.
Characteristic
1. The use of full spectrum xenon lamp light tube;
2. A variety of filter systems for choice;
3. Rain spraying function;
4. Relative humidity control.
5, Test chamber air temperature control system;
6. Irregular shape of the sample holder;
7. Inexpensive xenon arc lamp.
8. Easy to install, easy to use and easy daily maintenance.
Feature
Simulate full sunlight spectrum:
BOTO measures the light resistance of the material by exposing the material to ultraviolet (UV), visible light and infrared light. It uses filtered xenon arc lamps to produce a full sunlight spectrum with the greatest consistency with sunlight. The xenon arc lamp with reasonable filtering treatment is the best way to test the product's sensitivity to long-wavelength ultraviolet and visible light in direct light or sunlight through glass.
Light resistance test of indoor materials:
Due to long-term exposure to fluorescent lamps, halogen lamps or other light-emitting lamps, products placed in retail outlets, warehouses or other environments will also experience significant photo degradation. The BOTO xenon lamp test chamber can simulate and reproduce the destructive light in such commercial lighting environments, and can accelerate the test process with higher intensity.
Simulated climate environment:
In addition to the photo degradation test, the BOTO xenon lamp test box can also become a weathering test box by adding a water spray option to simulate the influence of outdoor moisture on the material.
Relative humidity control:
Some types of BOTO Xenon lamp test chambers can provide relative humidity control. For many humidity-sensitive materials, this function is also very important, and many test protocols also require humidity control.
Application:
The BOTO xenon lamp test box uses a xenon arc lamp that can simulate the full sunlight spectrum to reproduce the destructive light waves existing in different environments, and can provide corresponding environmental simulation and accelerated tests for scientific research, product development and quality control.
The BOTO xenon lamp test box can be used to select new materials, improve existing materials, or evaluate changes in durability after changes in the composition of materials. It can well simulate changes in materials exposed to sunlight under different environmental conditions.
General standard
IEC 68-2-9, Basic Environmental Testing Procedures-Part 2:Guidance for Solar Radiation Testing
ISO 4892-1, Plastics-Methods of exposure to laboratory light sources-Part 1: General Guidance
ASTM G151, General Guidelines for Exposure of Nonmetallic Materials
ASTM G155, Xenon-Arc Test Apparatus for Exposure of Nonmetallic Materials
ISO 3865, Rubber, Vulcanized or Thermoplastic - Methods of test for staining on contact with organic materials
ISO 4665, Rubber, Vulcanized or Thermoplastic - Resistance to weathering
ISO 4892-2, Plastics-Methods of exposure to laboratory light sources-Part 2: Xenon-arc sources
JIS K 7350-2, Plastics-Methods of exposure to laboratory light sources-Part 2: Xenon-arc sources
DIN EN 513, Unplasticized polyvinylchloride (PVC-U)profiles for fabrication of windows & doors
ASTM D1248 , Polyethylene Plastic Extrusion Materials for Wire a nd Cable
ASTM D2565 , Xenon-Arc - Plastics for Outdoor Applications
ASTM D4101, Polypropylene Plastic Injection a nd ExtrusionMaterials
ASTM D4459 , Xenon-Arc - Plastics for Indoor Applications
ASTM D5071, Xenon-Arc Exposure of Photodegradable Plastics
ASTM D6662, Plastic Lumber Decking BoardsUL 1581, Reference Standard for Electrical Wires, Cables & Flexible Cords
SAE J2412, Accelerated Exposure of Automotive Interior TrimComponents Using a Controlled Irradiance Xenon-ArcApparatus
SAE J2527, Accelerated Exposure of Automotive ExteriorMaterials Using a Controlled Irradiance Xenon-Arc ApparatusQB/T 2727
ASTM D7356, Standard Test Method for Accelerated Acid EtchWeathering of Automotive Clearcoats Using a Xenon-ArcExposure Device
ISO 11341, Paints a nd varnishes - Artificial weathering a nd exposure to artificial radiation-Exposure to filtered xenon-arc radiation
ASTM D3451, Testing Coating Powders a nd Powder Coatings
ASTM D3794, Testing Coil Coatings
ASTM D6577, Standard Guide for Testing Industrial Protective Coatings
ASTM D6695, Xenon-Arc Exposures of Paints a nd Related Coatings
UL 2556 , ASTM G155, CSA C22.2
GB12831-86 vulcanized rubber artificial climate (xenon lamp) aging test method
GB/T1644.2-1999 Plastic Laboratory Light Source Exposure Test Method (Part 2: Arc Xenon Lamp)
GB/T8427-89 Textile color fastness test, color fastness to artificial light xenon arc
GB/T8430-98 Textile color fastness test, color fastness to artificial light xenon arc
GB/T1865-97 Paints, varnishes, artificial weathering and artificial radiation exposure (filtered xenon arc radiation)
GB/T16991-97 Textile Color Fastness Test Color Fastness to High Temperature Light: Xenon Lamp
GB/T5137.3-96 Test Method for Resistance to Radiation, High Temperature, Humidity, Combustion and Weather Simulation of Automobile Safety Glass
GB/T16259-96 Colored building materials, artificial climate acceleration, color aging test method.
GB/T2423.24-95 Environmental Test of Electronic and Electrical Products Part 2: Test Method, Test SQ: Simulate solar radiation on the ground.
|
Inner size D×W×H |
500×500×600 mm |
|
External size D×W×H |
1150×1200×1900mm |
|
Temperature range |
0℃～100℃ (under non-light conditions) |
|
Temperature deviation |
±2℃ (without lighting) |
|
Humidity range |
30～98％R.H |
|
Humidity deviation |
±2.5%R.H(humidity≥75%R.H) ±3%R.H(humidity≤75%R.H) (without light) |
|
Type of light source |
Imported air-cooled full solar spectrum long arc xenon lamp (average service life is about 1500 hours) |
|
Rain time |
1～9999 minutes, adjustable |
|
Rain cycle |
1～240 minutes, interval (break) adjustable |
|
Spectral wavelength |
290nm～800nm |
|
Xenon lamp power |
1KW, 2.5KW (lifetime: 1200 hours) |
|
Light source wavelength range |
290-800nm |
|
Heating power |
about 4.6KW |
|
Humidification power |
about 3KW |
|
Light source irradiance |
Full spectrum 300-800w/m2 (continuously adjustable); The energy compensation of the xenon lamp is realized by adjusting the voltage and current. |
|
Irradiation area: |
about 5500cm2 |
|
Distance from arc center to sample holder |
350～380mm |
|
Rotating speed of sample rotating basket |
None |
|
Water spray time |
0～99h59min, continuously adjustable |
|
Stop spraying time |
0～99h59min, continuously adjustable. |
|
Illumination time |
Can be programmed continuously |
|
Blackboard temperature |
65±3℃ (not within the measurement range) |
|
Cooling method |
Mechanical cooling and air cooling |
|
Total power and power supply |
about 8.5KW; 380V±10% 50HZ |
|
The main technical parameters of the above products are measured at room temperature below 26℃, relative humidity ≤85%R.H, and no-load working room, after two hours of constant temperature and humidity. |
|
About us
BOTO GROUP LTD. is a professional manufacturer of various kinds of testing equipments over 30 years, such as environmental test equipment, Industrial Hot Air Drying Ovens, UV Aging Test Chambers, Industrial Muffi Furnaces, Adhesive Paper Packing Testers, Plastic Rubber Testers, Hardness Testers, universal test machine, Checkweigher Machine, Metal Detectors The test service integrating design, research and development, production, sales, service and construction.
Our team
Certificate
Factory
Hot Tags: lab xenon test chamber xenon arc lamp weathering test machine, China, suppliers, manufacturers, factory, buy, cheap
