video
Salt Water Spray Cyclic Corrosion Test Chamber

Salt Water Spray Cyclic Corrosion Test Chamber

Environmental salt spray test chamber/nozzle salt spray/Cyclic corrosion salt spray machine Salt Spray Tester is used to test the anti-erosion quality of the surface of all materials after the rust-proof of painting, coating, electroplating, anoding and rust-proof of greasing.anti corrosion...

Product Introduction

Environmental salt spray test chamber/nozzle salt spray/Cyclic corrosion salt spray machine

Salt Spray Tester is used to test the anti-erosion quality of the surface of all materials after the rust-proof of painting, coating, electroplating, anoding and rust-proof of greasing.anti corrosion treatment for a variety of materials, corrosion resistance of their products.

 

Specifications:

Environmental salt spray test chamber/nozzle salt spray/Cyclic corrosion salt spray machine

1.The Salt Spray Test Machine is made of transparent materials so that the operator can see the tested sample in it and the spraying situation of the tested sample.

2. A waterproof structure is adopted between the chamber cover and chamber body, thus there is no salt spray overflow.

3.Adopts the tower spraying system and equipped with the salt solution filter system and non-crystal nozzle so as to realize even salt spray distribution and freely adjustable settlement.

4.Control System High precision P.I.D. temperature control meter with its error ±0.1°C. 


Features:

Environmental salt spray test chamber/nozzle salt spray/Cyclic corrosion salt spray machine

*Automatic / manual water system has automatically add the water level of the water level is low, the test is not interrupted. Water level is insufficient warning to ensure that the use of safety.

 

*Precision glass nozzle (PYREX) made of special glass, mist spread evenly and naturally fall on the specimen, and 4000 hours of continuous use, and to ensure that no crystalline salt obstruction.

 

*Attached double over-temperature protection, over-temperature warning display, and cut off the heater power to ensure that the use of safety.

 

*Inlet temperature controller using a digital display, PID control, error of ± 0.1 ° C.

 

*Laboratory using direct steam heating, heating up fast, and even reduce the standby time, heating tubes with high corrosion-resistant titanium tubing.

 

*Spray tower attached to the conical dispersion, with oriented fog, the function of regulating the amount of fog and uniform loading amount of fog.

 

*The saturated air barrel using Henry's law, be heated humidification, and provide the required humidity of the laboratory. Its made of SUS # 304 stainless steel insulation effect, with visual connectivity and drainage switch, in order to visually saturated air the barrel water level and cleaning.

 

*With automatic defogging device that can clearly watch the specimen in test chamber.

 

*Fog sealing sink, water seal to prevent fogging leakage.

 

*Laboratory sealing cover material for Taiwan imported PVC board, pneumatic cylinder automatic lifting way, easy to operate safe and reliable.

 

*The import timer using digital display, accurate timekeeping, H. M. seconds S can be segmented set any required test time, adjust the time range from 0.01 seconds to 9999 hours.

* Reagent supplement bottles hidden attached water level viewing window, easy to clean and should not be broken.

 

*Laboratory basket rack using plane indexing rack, can arbitrarily adjust the angle, four off the fog, and the fog direction completely consistent.

 

Corresponding Standard:

Environmental salt spray test chamber/nozzle salt spray/Cyclic corrosion salt spray machine

GB11158 GB10589-89 GB10592-89 GB/T10586-89 GB/T2423.22-2001

GB/T2423.1-2001 GB/T2423.2-2001 GB/T2423.3-93 GB/T2423.4-93 ASTM D1735

IEC60068-2-1.1990 IEC60068-2-2.1974 IEC 68-2-30 IEC68-2-03 EIA - 364-31C EIA - 364-59

 

Design standardISO-9227 ASTM-B117 JIS-D0201 H8502 H8610 K5400 Z2371
Internal sizeA:60×45×40cm / B:90×60×50cm
TemperatureLab: NSS.ACSS35°C±1°C / CASS 50°C±1°C
Saturated air cylinderNSS.ACSS35°C±1°C / CASS 50°C±1°C
Spray capacity1~10cc/h
Structure materialF.R.P
AccessoriesTest salt, barrel, tool
Power

1φ,220V/50H

 

Product Effects

 

80cm2 H 2.0ml Nozzle Salt Water Spray Test Cyclic Corrosion 0

80cm2 H 2.0ml Nozzle Salt Water Spray Test Cyclic Corrosion 1



1625493821(1)


_20210707110355

cs32938877-boto_group_ltd

OUR CERTIFACTES:

image

PACKAGE&DELIVERY:


1. Standard exported package: Internal anticollision protection, external export wooden box packaging.


2. Shipping by express, by air, by sea according to customers' requirements to find the most suitable way.


3. Responsible for the damage during the shipping process, will change the damage part for you for free.


4. 15-20days after confirming order,detail delivery date should be decided according to production season and order quantity.


Temi Programmable Temperature Humidity Test Chamber Mini Environmental 4



Hot Tags: Salt Water Spray Cyclic Corrosion Test Chamber, China, suppliers, manufacturers, factory, buy, cheap

Send Inquiry

whatsapp

teams

E-mail

Inquiry

Bag